Sparklight, formerly known as Cable One, is a cable internet provider primarily serving suburbs and rural areas in over a dozen states. Its no-contract plans offer good download speeds to areas fiber doesn’t often reach, but its data caps aren’t ideal.
Starlink uses new low-orbit technology to deliver satellite internet to customers around the globe. The company got its start offering faster speeds and much lower latency than other satellite providers, but now offers download speeds comparable to those offered by other satellite providers. Starlink still offers decently low latency for satellite, but it can’t compete against fiber or cable internet providers.
Viasat (formerly also Exede internet) can’t keep up with cable or fiber, but it’s a relatively fast and widely available choice for satellite internet. Viasat offers more speed and data than HughesNet, but can't match Starlink for upload speed and latency.
Sparklight’s no-contract cable internet plans are generally a decent value compared to other providers available in the communities the company serves. While you might not be able to get fiber in these areas, you’re likely to find DSL, satellite, or other cable internet service providers (ISPs). The speed you get for the price is comparable to other cable providers or a bit cheaper, and the performance surpasses DSL and satellite. All of this means Sparklight’s plans are worth strongly considering if your address is in one of its service areas.
We recommend choosing a Sparklight plan with at least 200 Mbps of download speed, but ideally more if it’s in your budget. Since Sparklight is a cable provider, upload speeds tend to be far below the download speeds. Upload speeds increase with each pricing tier, so if you work from home and have multiple connected devices you may want to pick one of the more expensive plans for seamless video calls.
All of Sparklight’s plans have data caps, except for its most expensive Gig plan. Data caps are typical for cable providers. While some competitors offer data caps over 1 TB for all of their plans, Sparklight’s plans have data caps that range from 100 GB to 1.5 TB. You can get 100 GB blocks of additional data for $10 during months when you need it, or you can upgrade to unlimited data with any plan for an extra $30/month. When calculating your needs, consider that the average person uses 536 GB of data per month (1).
The Gig plan offers the most data for your dollar and the highest speeds, but it’s more expensive than fiber plans with comparable download speeds, at least in some of the service areas. If you don’t want to pay top dollar, the Internet 300 and 500 plans also offer good speeds and high enough data caps for the needs of most households. We wouldn’t recommend the Internet 25 plan because its low speeds and data cap won’t comfortably meet most people’s needs.
Starlink offers a variety of internet plans in four main categories: Standard, Priority, Mobile, and Mobile Priority. Its Standard plan is decent for home internet if you don’t have any fiber or cable internet options, but it will cost $90–$120. The Mobile plan is intended for RVs and travelers. These standard plans aren’t subject to official data caps, which is a nice change! If you go with the mobile option, you can pause it month to month but your traffic will be deprioritized relative to home and priority users.
Starlink’s most expensive plans are now named Priority plans, and there’s one for fixed locations and one for use on the go. Both have data caps, and both require a spendy high-performance receiver. Both plans cost at least $250 per month, with increased rates if you need more high-speed data. That’s some of the most expensive prices we’ve seen for internet anywhere, so these plans are pretty hard to recommend for most households.
Satellite internet provider Viasat has plans that are priced similarly to Starlink's standard options, but with data caps and much higher latency. That means that, while you can get a Viasat plan of 100 Mbps in some places, your connection will still feel very slow because it takes so long for data to get to and from the high-orbit satellites. HughesNet, the other big satellite provider in the US, has pricing similar to Starlink's but strict data caps and download speeds that reach only 25 Mbps.
Even with its benefits compared to other satellite providers, Starlink earned a pretty low score on value because the service is much slower and more expensive than home internet from cable or fiber internet providers. It doesn’t compete very well against DSL or fixed wireless internet either, but it’s a decent option of last resort if you are a digital nomad or live in a rural area.
In remote areas where cable and fiber aren’t available, satellite internet may be your only option. Viasat offers a wide range of satellite internet plans, but only some of them offer good performance and value for your money compared to other satellite internet providers.
The best plans are Viasat’s Unlimited plans. Those with at least 25 Mbps of speed and 100 GB of high-speed data will give you the ability to do basic web browsing. Viasat’s most expensive plan, with 150 Mbps of download speed and 500 GB of high-speed data, is the best plan for larger households. It also gives you the most data for your dollar.
We wouldn’t recommend Viasat’s Liberty plans because the internet speed and data limits are far too restrictive. If you don’t mind sacrificing a bit of speed or data usage to save money, HughesNet’s 25 Mbps plans are less costly than Viasat’s equivalent plans. For a similar price, Starlink can achieve lower latency than Viasat, though Starlink is available only in limited locations and has customer service issues.
It's also important to think about price hikes. With Viasat, all plan prices go up after three months, in the range of $20–$100 depending on your plan. You can't get out of these increases because you'll have to sign a contract. It's a bummer, but we like that prices are guaranteed for two years starting in month four.
Sparklight is available in mostly rural and suburban areas where customers probably won’t be able to get fiber internet. This makes Sparklight’s cable internet speeds the best option in some communities that are otherwise served only by DSL or satellite, which can be slow and unreliable. According to a report from Ookla, Sparklight had the highest download speeds among fixed broadband providers in North Dakota and New Mexico. (2)
Sparklight is a fiber-rich cable provider, meaning it delivers service using a mix of fiber and coaxial cables. While it can achieve download speeds of up to 940 Mbps, its upload speeds are much lower than that, reaching 50 Mbps. This is a technical limitation of cable connections that those with fiber connections won’t experience. While this isn’t ideal for households with several people who want to do heavy gaming or take video calls at the same time, Sparklight’s download and upload speeds are generally still sufficient for most households. And for regular browsing and streaming for multiple users, it's just fine. However, the data caps may hold you back if you’re a heavy internet user. Occasional outages and inconsistent speeds do affect service according to customer reports on Downdetector. (3)
Starlink once offered download speeds that were much, much faster than what satellite competitors could offer, but the company changed its plans and pricing in May of 2023. Today, the service sells home internet with download speeds of 25–100 Mbps, upload speeds of 5–10 Mbps, and latency in the range of 25–50 ms. Those speeds look fast enough for gaming and video conferencing on paper, but third-party research from Ookla found that Starlink users are getting average download speeds of about 66 Mbps, upload speeds of nearly 8 Mbps, and latency of a 62 ms in the first quarter of 2023. That kind of service might be good enough for online shopping or even streaming one show in high definition, but you wouldn’t be able to make video calls, play some online games, or livestream your gameplay. (1)
That same study showed Starlink performed better on all speed metrics than competitors Viasat or HughesNet, but was worse than cable and fiber providers across the board. Unfortunately, Starlink speeds are slowing as the company adds new subscribers because of network congestion. The change in plan offerings is the best evidence of that, but it's not hopeless. The company has launched nearly 4,000 satellites and is planning new launches with updated V2 equipment it says will improve reliability and handle much more bandwidth. (2)
Of the two main satellite internet providers in the US, Viasat offers faster speeds (up to 150 Mbps). Viasat delivers good enough performance for basic web browsing and some light video streaming, but even its most expensive plans limit the amount of high-speed data you can use before speeds are throttled.
Additionally, both HughesNet and Viasat have very high latency. This latency, the delay that happens when data is traveling from the satellite to your home, makes even a 150 Mbps connection feel slow. Starlink, a new satellite internet provider, uses satellites closer to the earth, so it is able to offer even faster speeds (up to 100Mbps) and much lower latency than Viasat. For now, Starlink isn’t available in as many locations and performance isn’t as consistent, but it has similar pricing to Viasat and could be a strong alternative for some.
In terms of real-world performance, Viasat slightly outperforms HughesNet in terms of upload speed and latency, according to data from Ookla. (1) Nevertheless, Viasat won’t ever be a better choice than a cable or fiber connection due to the inherent limitations of satellite internet. Viasat also suffers from outages, which can sometimes last days even when the sky is clear, according to user reports from Downdetector. (2)
When you sign up for Sparklight internet service, you can call to schedule professional installation or choose self-installation. Both options are reasonably fast according to customer reviews. Professional installation is typically free and can be scheduled at your convenience. There's technically a $90 professional installation fee, but it is waived as part of a "permanent promotion." Self-installation is free and should take about 15 minutes once you receive your equipment in the mail.
You can choose to purchase your own Sparklight-supported modem or lease a modem from Sparklight for just over $10/month, less than some other providers. The installation cost, activation fee, and any equipment deposits may be waived for qualifying new customers.
Unlike other satellite internet providers, Starlink does not require (or even offer) professional installation. Instead, you will be sent a Starlink Kit that contains all the hardware you need to install a Starlink dish yourself. Although the kit comes with a satellite dish and a base, you may want to purchase a mount to place the dish above ground level for a clearer view of the sky.
If you need internet while traveling, you'll need one of Starlink’s mobile plans. If you don’t need to use the receiver while you’re traveling faster than 10 miles per hour, you can stick with the basic $600 model. If you need internet while your RV or boat is moving, though, you’ll need one of the Mobile Priority plans and the required high-performance receiver.
To install Starlink, download the app on your phone and follow the instructions to find an unobstructed view and complete the setup. The do-it-yourself installation is designed to be straightforward, but it can take several hours. If technical issues arise, you can turn to Starlink customer support or an unofficial online community for help.
Unlike HughesNet and Viasat, Starlink doesn’t offer a leasing option for its equipment in the US, or require an activation fee. Instead, customers have to buy the basic Starlink Kit for a high upfront cost of $599. That averages to about $25 per month if you spread the cost over two years, which is more than you would pay for Viasat or HughesNet equipment. If you need the high-performance Starlink kit because of either extreme weather or your Priority service plan, setup starts at $2,500 before taxes.
Getting a satellite internet connection up and running is more involved than a traditional wired connection. Viasat requires you to lease its equipment for $14.99 per month and have it installed professionally. The leasing and installation fees are about the same as HughesNet, and Viasat sometimes waives the $99 cost of installation for qualifying new customers. This is in contrast to Starlink, which requires you to pay several hundred dollars for its equipment upfront and install it yourself.
When you sign up for Viasat, you’ll usually get an appointment for installation within three to five days, and the process itself takes two to three hours. A technician will mount the dish where it can get the clearest view of the southern sky, either on your house or on a pole mount for $75 extra. Since the equipment is leased, when you cancel your service, you’ll be responsible for removing and returning the dish, transceiver, modem, cables, and any other hardware to Viasat.
Customer experience with Sparklight is about average compared to other providers. Tech support is available 24/7 by phone or email, and there are plenty of help articles available online. Like most other providers, equipment installation is straightforward whether you have it done professionally or do it yourself.
Common complaints include unplanned outages, inconsistent speeds, and long wait times to reach Sparklight support by phone, according to user reports on Downdetector. (4) If you try Sparklight’s internet service and it doesn’t live up to expectations, the company offers a 30-day money-back guarantee.
Starlink’s customer support seems to be struggling to keep up with the needs of its growing customer base. Along with sometimes inconsistent speeds and connectivity issues, this is leading to mixed experiences with the service.
Elon Musk, CEO of Starlink, recently said delays were most common in highly populated areas, but rural areas are the best place for the service, anyway. (3) There have also been reports of long delays in receiving Starlink equipment due to the effects of the global chip shortage on production. (4) Some customers who pre-ordered Starlink kits have had to wait more than a year to receive them and received few updates from the company (5), but you can look up your address using this Starlink map to find out what to expect.
Other internet providers tend to offer more customer support options and be more reachable than Starlink. Starlink’s website offers a customer support FAQ section, but there is no public contact phone number or email address. To contact the company directly for assistance, you have to log in and send customer support a message. On the plus side, it is possible to find help elsewhere. Starlink has an enthusiastic community of users who post helpful videos on YouTube and answer questions on Reddit.
Viasat customer service has a dedicated phone number, responsive online chat, and troubleshooting FAQs on its website for all its customers. This is similar to HughesNet’s customer support, and it surpasses Starlink’s lackluster customer service.
Viasat’s best customer service is reserved for those who pay an additional $8.99 per month for EasyCare. EasyCare gives you access to a priority support phone number, free service calls to your address, and discounted annual dish location adjustment. Viasat has additional offerings, including Viasat Voice (VoIP phone service), Viasat Shield (security software), and DISH (satellite TV)–but you won’t save much by bundling.